• HomeAbout usNewsProductsCasesEquipmentOrderContact us中文版
    Products
    YZG/FZG Series vacuum Drier

    Principle
    ※ It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster

    Application
    ※ It is suitable for drying heat sensitive materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.

    Technical parameters

    Specification/name YZG-600 YZG-800 YZG-1000 YZG-1400 FZG-15
    inside size of chamber(mm) φ600×976 φ800×1247 φ1000×1527 φ1400×2054 φ1500×1220×1400
    cuter size of chamber(mm) 1135×810×1020 1700×1045×1335 1693×1190×1500 2386×1657×1920 2060×1513×1924
    layers of baking shelf 4 4 6 8 8
    layer of baking shelf(mm) 81 82 102 102 122
    size of baking tray(mm) 310×600×45 460×640×45 460×640×45 460×640×45 460×640×45
    number of baking tray 4 8 12 32 32
    permitted pressureinside the pipe of baking shelf(Mpa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784
    temperature inside chamber(℃) 35-150 35-150 35-1 50 35-150 35-150
    vacuum in idle inside chamber(Mpa) -0.1 -0.1 0.1 0.1 -0 1
    under the condition of -0.1Mpa and 110℃ evaporation rate of water, kg/m2hr. 7.2 7.2 7.2 7.2 7 2
    when condenser is used.
    model and power of vacuum pump(kw)
    2X-15A
    2KW
    2X-30A
    3KW
    2X-30A
    3KW
    2X-70A
    5.5KW
    2X-70A
    5.5KW
    when condenser is not used.model and power of vacuum pump(kw) SZ-0.5
    1.5kw
    SZ-1
    2.2KW
    SZ-1
    2.2KW
    SZ-2
    4KW
    SZ-2
    4KW
    weight of frying chamber(kg) 250 600 800 1400 2100

     

    Feature
    ※ Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a centain amount of heat radiation, he conducting area of evaporator can be saved.
    ※ The heat source for operation of evaporation may be low pressure steam or surplus heat steam.
    ※ The heat loss of evaporator is less.
    ※ Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixing. It is in conformity with the requirement of GMP.
    ※ It belongs to static drier. So the shape of raw material to be dried can not be destroyed.
    ※ If use condensate, the solvent in raw material can be recovered.

    結構示意圖

    Home | About us | News | Products | Cases | Equipment | Order | Contact us | 中文版
    Copyright(C)2017,Changzhou Santai Spray Drying Equipment Co., Ltd.  All Rights Reserved.
    Supported by Toocle Copyright Notice
    先锋影音宅男午夜色资源在线观看|一区二区三区无码黄国产|无码人妻精品一二三区免费百度|亚洲国产综合无码网站推荐|日产2021一二三四免费|国产精品国产一级国产AV|把下边的草莓一个个捣碎|亚洲AV色噜噜噜久久久女同